ZyXEL ACCESSING INTERNET & INTRANET omni series Instrukcja Użytkownika Strona 88
- Strona / 168
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
76 Handling Analog Calls (non-data)
InterCom: ( ñ è H Flash è H #2
Call Waiting
The call waiting feature enables you to place a call on hold by
pressing the Flash key. If you press the Flash key again, the call
waiting function will be disabled and return to the previous call.
Call Waiting: H Flash
Placing a second call
When you have an active call on line, you may follow the procedures
below to make a second call:
1. Place the current call on hold by pressing the Flash key and 0.
2. Dial the phone number of the second party and wait for them to
answer.
Making a second call: H Flash è H #0 è H “555-1234”
Receiving a second call
If call waiting has been enabled, you will receive a signal through the
handset whenever a call is trying to come in while you are on-line. To
enable the call waiting function, use the AT Commands in the table
below:
AT Commands Description
ATS79.2=0 Disables call waiting for POTS port 1.
ATS79.2=1 Enables call waiting for POTS port 1(Default).
ATS79.3=0 Disable call waiting for POTS port 2.
ATS79.3=1 Enable call waiting for POTS port 2 (Default).
O
Note: If you disable the call waiting function(S79.2=0 or S79.3=0), the
second incoming call will be blocked.
O
Note: If you configure the POTS port for Modem/Fax connection
(S79.4=1 or S79.5=1), the call waiting feature of the respective
POTS port will be always disabled.
There are several ways to deal with a second incoming call:
- User’s Manual 1
- ZyXEL Limited Warranty 2
- FCC Part 15 Information 3
- Contacting ZyXEL 5
- Contents 7
- 1 Introduction 13
- Key to Model Differentiation 14
- Key Features of the omni 14
- Intelligent Features 15
- Technical Specifications 15
- Unpacking Your omni 16
- 6 Introduction 18
- 2 Installing omni External 19
- Back Panel 21
- Connecting to Your Computer 22
- Connecting to Your ISDN Line 24
- Power On and Self Diagnostics 25
- 3 Installing omni Internal 27
- Connecting the TA to your PC 28
- Plug and Play 28
- U Interface Model 31
- S/T Interface 31
- 4 Configuring Your ISDN 33
- 5 ISDN Communication 37
- Supported AT command types: 38
- Outgoing Calls 39
- Internal) 40
- Incoming Calls 41
- Digital Data 42
- Determining the Packet Length 42
- Answering a Call using MSN 43
- Data over Speech Channel 45
- 6 Setup for Windows 95 47
- Networking 50
- CAPI Installation 54
- 7 Point-to-Point Protocol 56
- Feature list 57
- Multilink PPP 59
- Call bumping 59
- Bandwidth On Demand (BOD) 60
- BACP/BAP 61
- 8 V.110 and Synchronous 63
- Making V.110 Calls 64
- V.25bis Command Set 65
- DTR Drop-Dialing Operation 66
- 9 V.120 ISDN 69
- Configuring the V.120 mode 70
- Answering incoming calls 71
- Speeds of 128Kbps 72
- ISDN (1TR6) 75
- 64 V.120 ISDN Communications 76
- 10 X.75 ISDN 77
- Answering an X.75 call 78
- Making an X.75 Call 78
- 70 X.75 ISDN Communications 82
- 11 Handling Analog Calls 83
- Accepting an Incoming Call 85
- Feature Phone (omni.net) 87
- Call Waiting 88
- Placing a second call 88
- Receiving a second call 88
- Call Broker 89
- Call Reject 89
- Call Transfer 89
- Three-way Conference Call 89
- 12 Advanced ISDN Call 91
- AT&ZOx=s. The 93
- Answering a Call 97
- Answering a Call for 1TR6 98
- Best-effort Call Answering 98
- Data Call Indication 99
- RING <CR><LF> 100
- Placing a Call 101
- Placing a call for 1TR6 102
- Leased Line ISDN 103
- 13 Security Functions 105
- Level 1 security 106
- Level 2 security 106
- Level 3 security 106
- Security Functions 97 109
- 14 Upgrading Your omni 110
- Kernel Mode 111
- 15 Diagnostics 112
- Power-on Self-test 113
- The Diagnostic Command (ATCG) 114
- Resetting The omni 115
- Capturing the Protocol Data 116
- Analyzing the Captured Data 117
- Diagnostics 107 119
- 16 AT Command Set 120
- AT Command Descriptions 121
- Description of ATI3 Output: 129
- 124 AT Command Set Reference 136
- 17 Status Registers and 137
- Setting S-registers 138
- S-Register Descriptions 139
- ATS35.7=1<enter> 160
- 18 Phone Jack Pinout 162
- 4. Not Connected 163
- 19 Serial Port Interface 164
- 20 Index 166
- Index 155 167
- Bundled, 62 167
- 156 Index 168
Powiązane produkty i podręczniki dla Urządzenia dostępowe ISDN ZyXEL ACCESSING INTERNET & INTRANET omni series
(8 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.036 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji