ZyXEL Communications Network Router wireless active fiber router Instrukcja Użytkownika Strona 17

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 16
Chapter 2 The WPS Button
FSG1100HN User’s Guide
The following table describes the LEDs and the WPS button.
Front Panel LEDs and WPS Button
LED
COLOR
STATUS
DESCRIPTION
Power
Green
On
The FSG1100HN is receiving power and
functioning properly
Off
The FSG1100HN is not receiving power.
Red
On
A system error has occurred.
WAN
Green
On
The FSG1100HN has a successful
10/100Mbps WAN connection.
Blinking
The FSG1100HN is sending/receiving data
through the WAN.
Off
The WAN connection is not ready, or has
failed.
WLAN/WPS
Green
On
The FSG1100HN is ready, but is not
sending/receiving data through the wireless
LAN.
Blinking
The FSG1100HN is sending/receiving data
through the wireless LAN.
The FSG1100HN is negotiating a WPS
connection with a wireless client.
Off
The FSG1100HN is not ready or has failed.
Orange
Blinking
The FSG1100HN’s WPS connection is being
configured.
Internet
Green
On
The FSG1100HN’s IP is connected (the
device has a WAN IP address from IPCP or
DHCP and fiber is linked or a static IP
address is configured, PPP negotiation has
successfully completed if used and fiber is
linked) and no traffic is detected. If the IP or
PPPoE session is dropped due to an idle
timeout, the light will remain green if a fiber
connection is still present. If the session is
dropped for any other reason, the light is
turned off. The light will turn red when it
attempts to reconnect and DHCP or PPPoE
fails.
Blinking
The FSG1100HN’s IP is connected and IP
traffic is passing through the device (either
direction), flashing at 4 Hz with a 50% duty
cycle.
Przeglądanie stron 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 182 183

Komentarze do niniejszej Instrukcji

Brak uwag