ZyXEL DMA-1000W Instrukcja Użytkownika Pobierz pdf (Strona 10)

ENGLISH

2.1 Check the LEDs (Lights)

Look at the front of the device.

1 The STATUS LED comes on.

2 The LAN light and/or the USB light turn on.

V Check your connections if the lights do not come on.

3 Use this step if you want to use a wired connection instead

of a wired connection (the DMA-1000W only supports one

type at a time). Refer to the User’s Guide to configure

wired LAN settings. Skip to the next step if you will use a

wireless connection. Connect the DMA-1000W’s LAN port

if your content files are on your computer. The media

server software should already be installed. Skip to the

next step if you will only play files from a USB stick.

• Use the straight-through Ethernet cable (gray at the

time of writing) to connect to an Ethernet switch, router

or hub.

• Use the cross-over Ethernet cable (red at the time of

writing) to connect directly to your computer.

4 If you want to play files from a USB memory stick, connect

it to the DMA-1000W’s USB port. This is optional if you use the wired or wireless

connection to connect to your computer.

5 Connect the POWER socket to a power source

using only the included power adaptor.

6 Point the antenna towards the ceiling. You will

also need to configure the wireless settings to

have the DMA-1000W connect to your computer

or wireless Access Point (AP). See section 3 .

7 Your computer should already be turned on. Turn

on the TV and the DMA-1000W.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 120 121

Brak uwag

ZyXEL DMA-1000W Instrukcja Użytkownika Strona 10